Seitenhistorie

...

1.1) Open the webinterface of the device, go to the menu SNMP → ConfigurationSystem and for Mode click on the slider off select the option Enabled to activate SNMP. Afterwards, click Apply.

1.32) Go to the menu SNMP → SNMPv3 → Users and click Add New Entry to create an SNMP user.

1.43) Modify the following parameters and click Apply:

• User Name: Enter a descriptive user name (in this example SNMP-User).
• Security Level: In the dropdown menu select the option Auth, Priv. This makes authentication via login credentials mandatory (Auth) and the data transfer is encrypted (Priv).
• Authentication Protocol: Make sure, that the option SHA-256 is selected.
• Authentication Password: Enter a password for the authentication. In conjunction with the user name it is used for the login. The password must have between 8 to 64 characters and the allowed character set ranges from ASCII numbers 33 to 126.
• Privacy Protocol: In the dropdown menu select the option AES-256.
• Privacy Password: Enter the same password entered for the Authentication Password. It is used for data encryption. The password must have between 8 to 64 characters and the allowed character set ranges from ASCII numbers 33 to 126.

1.54) Go to the menu SNMP → SNMPv3 → Groups and click on Add New Entry to create an SNMP group.

1.65) Modify the following parameters and click Apply:

• Security Model: In the dropdown menu select the option usm. USM (User-based Security Model) is only used for SNMPv3.
• User Security Name: Make sure, that the SNMP user created in step 1.43) is selected.
• Group Name: Enter a descriptive name for the SNMP group.

1.76) Go to the menu menu SNMP → SNMPv3 → ViewViews and click on Add New Entry to create an SNMP view. 

1.87) Modify the following parameters and click click Apply:

• View Name: Enter a descriptive name for the SNMP view.
• View Type: In the dropdown menu select the option included.
• OID Subtree: Enter the string .1.3. The OID path of LANCOM devices begins with this string. 

1.98) Go to the menu menu SNMP → SNMPv3 → Access and click on Add New Entry to create the SNMP access.

...

• Group Name: Make sure, that the SNMP group created in step 1.65) is selected.
• Security Model: In the dropdown menu select the option usm.
• Security Level: In the dopdown menu select the option Auth, Priv.
• Read View Name: Make sure, that the SNMP view created in step 1.87) is selected.  
• Write View Name: Make sure, that the SNMP view created in step 1.87) is selected.  

1.11) Click on the disk red disk symbol in the upper right corner to save the configuration as the start configuration.

1.12) Acknowledge the save process by clicking OK.

...