...
- A LANCOM router is operated as a gateway, which, among other things, also provides the Internet connection.
- A local network is available to all employees.
- A LANCOM managed access switch is used as the central network component to which all other LANCOM devices are connected.
The existing scenario should be upgraded with Wi-Fi access for guests:
- An additional SSID should be broadcast by all access points (e.g. “HOTSPOT”).
- The guest Wi-Fi should be in its own local network that has no access to the company's management network and that offers only Internet access to users.
- There should be no communication between the Wi-Fi clients in the guest Wi-Fi.
- Optionally there should be a limit on the bandwidth available for Internet access.
Procedure:
1) Open your LMC project and navigate to the menu Networks.
2) Click Add network → Hotspot network.
3) Use the Network settings to adjust the basic technical settings for the new hotspot network:
...
4) At this point you can save the settings of the hotspot network.
5) The remainder of the configuration areas are for optional adjustments to the appearance and functionality.
...
| Info |
|---|
|
6) Save your settings.
...
| Info |
|---|
If your network does not use a switch and the access points are directly connected to the LANCOM router by Ethernet cable, you can skip this step of the configuration. |
9) Navigate to the menu Sites → Networks and select the site you are configuring.
10) Click the button Assign networks and select the hotspot network from the displayed list.
11) In the final step, the new network configuration is rolled out to all devices on your local network.
...