Versionen im Vergleich

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.
Seiteneigenschaften


Description:

This document describes how to configure a cloud-managed hotspot with the LANCOM Management Cloud (LMC).

Requirements:

Info
  • The procedures described below are based on a fully functional network scenario managed by the LMC.
  • All components used in this configuration example are managed by the LMC.

Scenario:

The local network of a company is operated entirely with LANCOM devices and managed and configured by the LANCOM Management Cloud.

  • A LANCOM router is operated as a gateway, which, among other things, also provides the Internet connection.
  • A local network is available to all employees.
  • A LANCOM managed access switch is used as the central network component to which all other LANCOM devices are connected.

...

  • An additional SSID should be broadcast by all access points (e.g. “HOTSPOT”).
  • The guest Wi-Fi should be in its own local network that has no access to the company's management network and that offers only Internet access to users.
  • There should be no communication between the Wi-Fi clients in the guest Wi-Fi.
  • Optionally there should be a limit on the bandwidth available for Internet access.

Procedure:

1) Open your LMC project and navigate to the menu Networks.

...

Info

You can also set up this scenario if your gateway router is aware of the hotspot network but is not a LANCOM router and is not managed by the LMC. In this case you need to activate the option “My router is not managed by LMC and capable of VLAN”.

  • With this option enabled, the hotspot data traffic is forwarded to the configured VLAN. Third-party devices have to be configured so that they can handle this VLAN.

...

13) The following steps are optional adjustments.

Optional adjustments to the hotspot network:

Limit the bandwidth available to the hotspot:

1) Navigate to the menu Networks and select the hotspot network.

...

4) Save your settings and roll out the new configuration to your devices (see step 11).

Use application management to control the applications and/or protocols allowed on the hotspot:

1) Navigate to the menu Networks and select the hotspot network.

...