2.1) Open the menu RADIUS → Server und activate the option RADIUS authentication active.
Image Modified 2.2) Go to the menu RADIUS services ports.
Image Modified 2.3) Make sure, that the Authentication port is set to 1812.
Image Modified 2.4) Go to the menu IPv4 clients.
Image Modified 2.5) Create a new entry and allow the switch to communicate with the RADIUS server.- IP address: In this example the switch has the local IP address 192.168.1.11.
- Netmask: Enter the netmask 255.255.255.255. This value represents a single IP address.
- Protocol: Make sure, that the protocol RADIUS is used.
- Client secret: Enter a password the switch has to use for the authentication with the RADIUS server. This password also has to be entered in the switch configuration (see step 3.3).
Image Modified 2.6) Go to the menu EAP.
Image Modified 2.7) As Default method select TLS.
Image Modified 2.8) The configuration of the RADIUS server is now complete. Write the configuration back into the router.