...
- LANCOM R&S®Unified Firewall with LCOS FX as of version 10.3
- Two Unified Firewalls of the same model (except UF-50 and UF-100)
- The same firmware version has to be installed on both Unified Firewalls
- One Unified Firewall license on the Master firewall
- The configuration on the Master Firewall has to be complete
- At least one free Ethernet port on both devices
- The Gratuitous ARP of the Slave Firewall has to be transmitted by the switch in the local network
- Web browser for configuring the Unified Firewall.
The following browsers are supported:- Google Chrome
- Chromium
- Mozilla Firefox
...
| Hinweis |
|---|
After synchronizing the configuration the Slave Firewall cannot be reached via its web interface! |
3. Reading out the HA cluster status:
The current status of the HA cluster can be read out on the Master firewall in the Overview on the right side under High Availability.
4) Operating the HA cluster in the LMC (optional):
| Info |
|---|
The LMC supports the HA cluster, however it cannot be configured via Smart-Config in the LMC. Therefore the HA cluster has to be configured manually.. |
| Hinweis |
|---|
Before conducting a role change on an HA cluster and pairing the cluster with the LMC, a valid license has to activated on the Master firewall (the demo license is not sufficient). |
43.1) Set up the HA cluster as described in steps 1) and 2).
34.2) Connect the Master Firewall to the LMC as described in the following Knowledge Base article in step 2.2.2):
Pairing a LANCOM device with the LMC
34.3) In the LMC menu Devices, the HA cluster is marked by a corresponding symbol (under Model).
...