This document describes how to set up an Internet connection with LANCOM 3G/4G routers by using the integrated 3G/4G modem.
Info
The manual configuration of a 3G/4G connection is described in the reference manual. In some cases this configuration methode is necessary, e.g. when the 3G/4G connection has to be configured via the Detail configuration in the LANCOM Management Cloud.
Info: A description of how to set up a 3G/4G connection when using a USB modem is available in the following KnowledgeBase article Image Removed .
1.1) Launch the Setup Wizard in LANconfigand select the option Set up Internet access.
Image Removed
Image Added
1.2) In the following dialog, select the option Mobile interface (internal modem).
Image Removed
Image Added
1.3) Set the Countrywhere the 3G/4G modem is to be operated.
Image Removed
Image Added
1.4) Select your Internet service providerfrom the list that follows.
Image Removed
Image Added
1.5) Enter a name for the Internet connectionand the dial-up numbergiven to you by your provider.
Please only change the default value for the dial-up number if you have received a different value from your provider.
Image Removed
Image Added
1.6) Enter your PIN for the 3G/4G connection. Should your provider have communicated a different APN, modify the default value to suit.
Information:
Info
Depending on the provider's APN, your 3G/4G connection may be assigned a public IP address or a private IP address. Information on this is available from your provider.
Image Removed
Image Added
1.7) In the following dialog, accept the default value for the short-hold time.
Information:
A short-hold time setting of 9999causes the UMTS/3G or LTE/4G connection to remain connected permanently, and a disconnect will be automatically reconnected.
A short-hold time setting of 0causes the UMTS/3G or LTE/4G connection to remain connected permanently, but a disconnect is not automatically reconnected.
If you want your 3G/4G connection to be disconnected when inactive, enter an appropriate value for the short-hold time (e.g. 300 seconds).
Image Removed
Image Added
1.8) In this example no additional ISDN backupis to be used.
Image Removed
Image Added
1.9) Click on Finishto write the configuration back to the LANCOM router.