...
There are several default settings and profiles in VPN (e.g. encryption parameters). These are used to set up a VPN connection and allow for an easier configuration by means of prefabricated parameters.
When using IKEv2 zje the remote site DEFAULT in the Connection list has a special role, as the initial Bei Verwendung von IKEv2 kommt der Gegenstelle DEFAULT in der Verbindungs-Liste eine besondere Bedeutung zu, da der initiale Verbindungsaufbau über diese erfolgt. Wenn die VPN-Verbindung erkannt wird (etwa anhand der Identitäten), erfolgt ein Schwenk auf die tatsächliche VPN-Gegenstelleinitial connection establishment is carried out via this remote site. When the VPN connection is recognized (e.g. on the basis of the identities), a switch to the actual VPN remote site occurs.
This article describes how the default settings in VPN can be restored by using an attached script file.
Hinweis |
---|
The default profiles must not be deleted or modified. Otherwise it is possible, that the VPN connection cannot be established anymore! |
Procedure:Wurden
Standard-Einstellungen gelöscht, können diese mithilfe eines der nachfolgenden Skripte wiederhergestellt werden. Dazu muss das Skript entweder per LANconfig oder per WEBconfig in den Router geladen werdenIf default settings were deleted, they can be restored by using one of the attached scripts. The script can be imported into the router via LANconfig or via WEBconfig.
LANconfig:
1. Führen Sie in LANconfig einen Rechtsklick auf dem betroffenen Router aus und wählen im Kontextmenü Konfigurations-Verwaltung → Aus Skript-Datei wiederherstellen aus.
Info |
---|
Alternativ können Sie die Skript-Datei auch per Drag & Drop auf den Router ziehen. |
2. Wählen Sie die passende Skript-Datei aus und klicken auf Öffnen.
WEBconfig:
1. Verbinden Sie sich mit dem Router per Web-Browser und wechseln in das Menü Extras → Dateimanagement → Konfigurations-Skript anwenden.
) Perform a rightclick on the affected router and in the context menu select Configuration Management → Restore Script from File.
Info |
---|
As an alternative you can also drag & drop the script file onto the router. |
2) Select the suitable script file and click Open.
WEBconfig:
1) Connect to the router via the web browser and go to the menu Extras → File management → Execute Configuration script.
2) Select the suitable script file as Filename and click Start Upload2. Wählen Sie bei Dateiname die passende Skript-Datei aus und klicken auf Upload starten.
IKEv1:
IKEv1 ab LCOS 10.20:
...