...
Hinweis |
---|
Where an upstream router is operated, port forwarding to be set up on it to enable access to the Unified Firewall. This is described in step 3 for LANCOM routers. If access by LANCOM Support is no longer required, LANCOM Systems recommends that you deactivate the remote access. |
Info |
---|
Necessary IP addresses for remote access: SSH:
Webclient:
|
Requirements:
- LANCOM R&S®Unified Firewall with firmware version 10.2 or later
- Web browser for configuring the Unified Firewall.
The following browsers are supported:- Google Chrome
- Chromium
- Mozilla Firefox
...
1.3) Under Source, enter the IP address 212.117.89.9 in CIDR notation ( Classless Inter-Domain Routing) in order to allow access via SSH (i.e. from 212.117.89.9/32) and enter a meaningful name under Title.
...
Info |
---|
Before LCOS FX 10.4 the IP address 217.6.21.90 must also be entered in CIDR notation (i.e. from notation. |
Necessary entries:
- 212.117.89.9 /32
- 217.6.21.90/32
...
- (only before LCOS FX 10.4)
1.4) Set check marks for LANCOM Customer Support, Rohde & Schwarz Internet Gateway and Rohde & Schwarz Cybersecurity Customer Support and click Save.
...
2.3) Under Source, enter the IP addresss 212.117.89.9 and 217.6.21.90 in CIDR notation ( Classless Inter-Domain Routing) in order to allow access via HTTPS (i.e. from 212.117.89.9/32 and 217.6.21.90/32) and enter a meaningful name under Title.
...
Info |
---|
Before LCOS FX 10.4 the IP address 62.153.130.132 must also be entered in CIDR notation (i.e. from notation. |
Necessary entries:
- 212.117.89.9 /32
- 217.6.21.90/32
- 62.153.130.132/
...
- 32 (only before LCOS FX 10.4)
2.4) Set check marks for LANCOM Customer Support, Rohde & Schwarz Internet Gateway and Rohde & Schwarz Cybersecurity Customer Support and click Save.
...
If a LANCOM router is operated upstream, it needs to be set up with port forwarding to enable access to the Unified Firewall. This is the case when using the layer-3 loop and a “series” connection .
3.1) Open the configuration for the router in LANconfig and switch to the menu item IP-Router → Masq . → Port forwarding table .
...