...
- LCOS LX as of version 5.20 (download latest version)
- LANtools as of version 10.40.0031 (download latest version)
WLAN management mit with WLC: Betriebsmodus
Auf Access Points mit LCOS LX gibt es keinen Schalter, mit dem der Betriebsmodus zwischen "Standalone-Betrieb" und "Verwaltung durch einen WLAN-Controller" für einzelne WLAN-Module gewechselt werden kann. Stattdessen kann die Unterstützung nur global für den Access Point in dem Menü Wireless-LAN → WLC durch den Schalter Betrieb mit WLC aktiv aktiviert bzw. deaktiviert werden.
Info |
---|
Soll der Access Point manuell konfiguriert oder durch die LANCOM Management Cloud verwaltet werden, muss der Schalter Betrieb mit WLC aktiv auf Nein gesetzt werden. Es ist geplant in einer zukünftigen Firmware-Version das WLAN-Management auf dem Access Point nach Ablauf einer gewissen Zeitspanne, in der kein WLAN-Controller gefunden wurde, automatisch zu deaktivieren. |
WLAN-Management mit WLC: Kein unverschlüsselter Kontrollkanal
Operating mode
On access points with LCOS LX there is no switch to change the operation mode between "Standalone" and "Managed by a WLAN controller" for individual radio modules. Instead the WLAN controller support can only be activated or deactivated globally in the menu Wireless-LAN → WLC via the switch Operating with WLC.
Info |
---|
If the access point should be configured manually, the switch Operating with WLC has to be set to No. If the access point is connected to the LMC and receives a WLAN profile, the switch Operating with WLC is set to No automatically by the LMC. |
Info |
---|
Informations on the supported WLC features are available in this knowledge base document. |
WLAN management with WLC: No unencrypted Control channel
Access points with LCOS LX don't support an unencrypted Control channel. Therefore the Control channel encryption in the WLAN controller has to be set to Default or DTLS for the LCOS LX access points in the menu WLAN Controller → AP Configuration → Access point table. This applies for separate profiles as well as the default profile Access Points mit LCOS LX unterstützen keinen unverschlüsselten Kontrollkanal. Daher muss im WLAN-Controller in dem Menü WLAN-Controller → AP-Konfiguration → Access-Point-Tabelle in den Einträgen für die betroffenen Access Points die Kontrollkanal-Verschlüssel. auf Default oder DTLS gesetzt werden. Dies gilt für separate Profile als auch für das Default-Profil ff:ff:ff:ff:ff:ff.
Info |
---|
Der Eintrag Default verweist im Standard auf DTLS. Dies kann in WEBconfig oder auf der Konsole geändert bzw. überprüft werdenThe entry Default is set to DTLS ex factory. This setting can be verified or changed via WEBconfig or the CLI. WEBconfig: CLI Konsole: |
LEPS-MAC: Format of the MAC address
...
Info |
---|
The same format has to be used when configuring this feature via the CLI. |