2.1) Open the menu RADIUS → Server und activate the option RADIUS authentication active.
Image Modified2.2) Go to the menu RADIUS services ports.
Image Modified2.3) Make sure, that the Authentication port is set to 1812.
Image Modified2.4) Go to the menu IPv4 clients.
Image Modified2.5) Create a new entry and allow the switch to communicate with the RADIUS server.- IP address: In this example the switch has the local IP address 192.168.1.11.
- Netmask: Enter the netmask 255.255.255.255. This value represents a single IP address.
- Protocol: Make sure, that the protocol RADIUS is used.
- Client secret: Enter a password the switch has to use for the authentication with the RADIUS server. This password also has to be entered in the switch configuration (see step 3.3).
Image Modified2.6) Go to the menu EAP.
Image Modified2.7) As Default method select TLS.
Image Modified2.8) The configuration of the RADIUS server is now complete. Write the configuration back into the router.