Description: In scenarios where an ISDN PBX or an ISDN telephone is operated at a LANCOM router with the Voice Call Manager, a CONNECT signal informs the ISDN device that a telephone call has been established. This message includes the number of the call destination, which is often used by the ISDN device as the “called number”. In some cases it may be necessary to modify the “connected number”, for example by removing the country code for national calls. This article describes how to modify the “connected number” with the use of the call-routing table. Important: The "connected number" can be modified, but it cannot be suppressed completely. Requirements: Procedure: The call route to be modified has to be the final one that is processed. This changes not only the "connected number” displayed by the ISDN device, but also the dialed number that is transmitted to the provider. 1) In LANconfig, open the configuration dialog for the router and switch to the menu |