Seitenhistorie

Seiteneigenschaften

Description:

This document describes how a LANCOM router is configured to set a maximum bandwidth for a computer or network for the protocols HTTP and HTTPS.

Requirements:

LANtools as of version 7.80 (download latest version)
LCOS as of version 7.80 (download latest version)

Procedure:

Start the program LANconfig and mark the router which is to be set up with a maximum bandwidth.

1) After opening the configuration, please go to the Firewall/QoS section.

Image Removed

Image Added

2) Now select the Rules tab and create a new rule with Add.

Image Removed

Image Added

Image Removed

Image Added

3) Enter a name for the rule here.

Image Removed

Image Added

4) Now select the Services tab and for Protocols/target services enable the item the following protocols/target services. Click on Add.

Image Removed

Image Added

For our example, now add the protocols HTTP and HTTPS:

Image Removed

Image Added

Image Removed

Image Added

5) Switch to the Stations tab and enter the stations or networks
that are to be restricted. Click on Stations -> Add.

Image Removed

Image Added

6) Enter the stations or networks according to your needs: In our example we want to restrict the station 192.168.10.20.

Image Removed

Image Added

After confirming, the entry should look like this.

Image Removed

Image Added

7) Now switch to the Actions tab.

Image Removed

Image Added

8) Remove the object REJECT by highlighting it and then clicking on Delete.

Image Removed

Image Added

9) Add a new object.

Image Removed

Image Added

You will see the following view, which must be changed according to your requirements. In this case, the rule applies only if it relates to the default route.

We have decided on a maximum bandwidth of 25 kbps. Packages exceeding this bandwidth are dropped. Do not use reject! This would terminate the entire connection instead of just dropping the excess packets.

We have turned off SNMP to avoid generating a message every time the Internet is accessed via HTTP/HTTPS.

Image Removed

Image Added

10) Confirm your entries.

11) Write everything back to the router.

Specifying the speed of an external modem:

1) Open LANconfig and go to Interfaces -> WAN -> Interface settings -> DSL.

If more than one DSL connection is available, double-check to make sure that you configure the correct one.