...
In order for the access point to be able to authenticate at the RADIUS server of the WLAN controller, the authentication method must be set and user data have to be set for logging in. This example uses the authentication method TLSPEAP/MSCHAPv2. The user data of the access point were was configured on the WLAN controller router in step 1.47.
23.1) Open a Telnet or SSH session on Connect to the access point Point via CLI and go switch to the path Supplicant-Ifc-Setup:
cd /Setup/LAN/IEEE802.1x/Supplicant-Ifc-Setup
23.2) Go to the path for the LAN interface. For this example we are using interface LAN-1.
cd LAN-1
23.3) Use the following command to set the user data for authentication at the RADIUS server:
...
In this example, the command is set credentials ap1:ap1
23.4) Use the following command to set the authentication method as PEAP/MSCHAPv2:
...