Description: The following document describes how to configure LEPS (LANCOM Enhanced Passphrase Security) on a LANCOM access point and in a WLAN Controller scenario.
Procedure 1) Configuring LEPS-MAC on a standalone access point: 1.1) Go to the menu item Wireless LAN → Stations/LEPS → LEPS MAC, select the option transfer data from the listed stations... and open the menu Station rules. 1.2) Modify the following parameters:- MAC address pattern: Enter the MAC address of a WiFi end device.
- SSID pattern: Enter the wildcard * so that the WiFi end device has access to all SSIDs.
- Name: Enter a descriptive name for the WiFi end device.
- Passphrase: Enter the WiFi password, which should be used for this specific WiFi end device
2) Configuring LEPS-MAC on a WLAN Controller: 2.1) Go to the menu RADIUS → Server and activate the option RADIUS authentication active to activate the RADIUS server. 2.2) Go to the menu WLAN Controller → Stations/LEPS → Station rules. 2.3) Modify the following parameters:- MAC address pattern: Enter the MAC address of a WiFi end device.
- SSID pattern: Enter the wildcard * so that the WiFi end device has access to all SSIDs.
- Name: Enter a descriptive name for the WiFi end device.
- Passphrase: Enter the WiFi password, which should be used for this specific WiFi end device
|
|