Description:

This document describes how to configure a cloud-managed hotspot with the LANCOM Management Cloud (LMC).

Requirements:

• LCOS as of version 10.42 or LCOS LX as of version 5.30 (download current version)
• Access to the LANCOM Management Cloud (subject to charge)
• Web browser

Scenario:

A company’s local network is operated with LANCOM access points and switches and is managed by the LANCOM Management Cloud, with the exception of the gateway router:

• A router from a different manufacturer is operated as a gateway, which, among other things, also provides the Internet connection.
• The gateway router is not managed by the LMC, but it is configured via VLAN so that it is located in the hotspot network and provides Internet access there.
• A local network is available to all employees.
• A LANCOM managed access switch is used as the central network component to which all other LANCOM devices are connected.
• The existing LANCOM access points broadcast a Wi-Fi network with the SSID “Management”. This Wi-Fi can be used by all company employees.

The existing scenario should be upgraded with Wi-Fi access for guests:

• An additional SSID should be broadcast by all access points (e.g. “HOTSPOT”).
• The guest Wi-Fi should be in its own local network that has no access to the company's management network and that offers only Internet access to users.
• There should be no communication between the Wi-Fi clients in the guest Wi-Fi.

Procedure:

1. Configuration steps on the gateway router:

1.1) On the gateway router, you create an additional local network, which is given a VLAN ID.

• In this example, we want the hotspot network to be assigned the local IP address range 192.168.67.0/24.
• The VLAN ID should be 999.

1.2) Make sure that the newly created local network is connected to the Internet.

2. Configuration steps in the LMC:

2.1) Open your LMC project and navigate to the menu Networks.

2.2) Click Add network → Hotspot network.

2.3) Use the Network settings to adjust the basic technical settings for the new hotspot network:

• SSID name: Enter a name for the broadcast SSID (e.g. HOTSPOT). This can be max. 16 characters long.
• Global IP range: This field specifies the IP address range used by the hotspot network. Enter the IP address range in CIDR notation (e.g. 192.168.67.0/24).
• VLAN ID: The VLAN ID is set to 999 by default. You can change this as you wish (in the range from VLAN ID 2 to 4094).
• The hotspot gateway is not managed by LMC: You must activate this option. Note that the VLAN configuration has to make the gateway router a member of the hotspot network.

2.4) At this point you can save the settings of the hotspot network.

2.5) The remainder of the configuration areas are for optional adjustments to the appearance and functionality.

• If, for example, you want access to the hotspot network to require password authentication, change the function in the Authentication area to Password and assign a global password for to accessing the hotspot.

2.6) Save your settings.

2.7) In the Switches section you specify the switch ports used to carry the new hotspot network. The selected ports are shown in the color of the hotspot network.

2.8) Then click on Save.

2.9) Navigate to the menu Sites → Networks and select the site you are configuring.

2.10) Click the button Assign networks and select the hotspot network from the displayed list.

2.11) In the final step, the new network configuration is rolled out to all devices on your local network.

• Switch to the Devices menu and roll out the configuration to all devices with a configuration status shown as “Outdated” since configuring the hotspot. This may take some time depending on the number of devices involved.

2.12) This concludes the configuration of the cloud-managed hotspot. Your Wi-Fi will now broadcast a new SSID with the name of your hotspot network. As soon as you connect to this SSID, you will be asked to login to the network.