Versionen im Vergleich

Alte Version 3

changes.mady.by.user LANCOM Redaktion

Gespeichert am

verglichen mit

Neue Version Aktuell

changes.mady.by.user LANCOM Redaktion

Gespeichert am

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.
Seiteneigenschaften


Description:
This document shows you how to set up the QoS rules in a LANCOM router firewall in order for them to operate with the settings recommended for VoIP connections.


Requirements:


Procedure: 
Note:
Info
The firewall settings described here depend on the following:
  • The Diff-Serv flag generated by the VoIP application (generally EF)
  • Which codec is used, as this determines the guaranteed bandwidth (
compressed or uncompressed
  • e.g. G.711, G.729)
  • The ports (usually port 5060 for SIP signaling)

In order for the QoS to work properly, it is important that the bandwidth values made available by the provider are specified on the Internet connection, otherwise the mechanism has no reference values!

Please note the special notes on using Unify telecommunications systems from Deutsche Telekom in the following instructions!



1) Firewall rule 1:
The first firewall rule reserves bandwidth for the SIP signaling:
1.1) In LANconfig, open the configuration dialog for the LANCOM router and switch to the menu
item Configuration ->
item Firewall/QoS
->
→ IPv4 rules
->
→ Rules.
Image Removed
Image Added
1.2) Enter
a
a name for the firewall rule and set the priority to 1.
Image Removed
Image Added
1.3)
The
The action must be set to the action object ACCEPT.
Image Removed
Image Added
1.4) On
the
the QoS tab you need to add a custom QoS action.
Image Removed
Image Added
1.5) Configure
a
a guaranteed minimum bandwidth of 1 kbps per session.
Image Removed
Image Added
1.6) On
the
the Stations tab set the Connection source and Connection destination to all stations.
Image Removed
Image Added
1.7) On
the
the Services tab, under Target services you add a new service object for the SIP service.
On
the
the General tab, give the new service object a name.
Image Removed
Image Added
1.8) On
the
the Services tab, select the option Custom protocols
->
→ Edit custom protocols...
1.9) In
the
the Ports field, enter the ports 5060 and 5061 separated by a comma.
Image Removed
Image Added
1.10) The new service object is entered in
the
the List of target services. Finish the configuration of the first firewall rule with OK.
Image Removed
Image Added


2) Firewall rule 2:
The second firewall rule prioritizes the RTP data. Your IP phones must be set so that
the
the RTP data is marked with the EF flag.
Note:
Info

This is a presetting for many IP phones. However, just to be on the safe side you should check the configuration of your phones.

2.1) In the Firewall objects section, click the button Action objects and add a new action object in the dialog that follows.
Image Removed
Image Added
2.2) On the General tab, give the action a descriptive name. On the Actions tab, click Add.
Image Removed
Image Added
2.3) Enable the
option
option for DiffServ-CP and select the flag EF. Close the dialog with OK
.
Image Removed
.
Image Added
Info

The Unify telecommunications systems from Deutsche Telekom and also some telecommunications systems from other manufacturers send a dummy RTP packet at the beginning of a phone call, which has a wrong DiffServ tag. As a result, the created firewall rule would not apply if the DiffServ tag "EF" was used. We therefore recommend that when using these PBXs, you create an action object that does not use a DiffServ tag.

In addition, later in step 2.12, the firewall rule is restricted to the local IP address of the PBX so that it only applies to packets that are sent to the PBX.

Image Added

2.4) In the Firewall objects section, click the button QoS objects and add a new QoS object in the dialog that follows.
Image Removed
Image Added
2.5) On
the
the General tab, give the action a descriptive name. On the Actions tab, click Add.
Image Removed
Image Added
2.6)
Add
Add three QoS conditions. For each of the conditions, enable the option for DiffServ-CP and set the flag to EF.
  • Configure a guaranteed minimum bandwidth. You have to define these individually depending on your scenario. In this example, a minimum bandwidth of 94 kBit / s is configured per session. According to our experience, this value has proven to be sufficient and practicable.
Image Added
Info

Note for users of Internet connections with low bandwidth:

For Internet connections with low bandwidth (guide value <50 Mbit / s downstream & 10 Mbit / s upstream), it makes sense to also configure fragmentation and PMTU reduction:

  • Configure a maximum packet size of 576 bytes for the fragmentation of the
other Image Removed
  • remaining packets.
  • Configure a reduction of the PMTU to 576 bytes.
  • Configure a global minimum bandwidth of 80 kbps per session.

    • Image Added

    2.7) Confirm your configuration with the OK button.

    Image Removed

    Image Added

    2.8) Navigate to the
    menu Configuration ->
    menu Firewall/QoS
    ->
    → IPv4 rules
    ->
    → Rules and add another firewall rule.
    Image Removed
    Image Added
    2.9) On
    the
    the General tab, enter a descriptive name.
    Image Removed
    Image Added
    2.10) On
    the
    the Actions tab, select the action object you created in step 2.2.
    Image Removed
    Image Added
    2.11) On
    the
    the QoS tab, select the QoS object you created in step 2.4.
    Image Removed
    Image Added
    2.12) On
    the
    the Stations tab, set the Connection source and Connection destination to all stations
    .
    Image Removed
    .
    Image Added 
    Info

    When using a Unify PBX from Deutsche Telekom, you must specify the PBX as the connection source so that the rule only takes traffic to the PBX into account.

    In the example, a firewall object was created and used for the local IP address of the PBX.

    Image Added

    2.13) On the Services tab you set the Protocol/source services and Protocol/target services to all protocols/source services.

    Image Removed
    Image Added
    Info

    When using a Unify PBX from Deutsche Telekom, it makes sense to configure the UDP protocol here.

    Image Added

    2.14) Complete the configuration of the second firewall rule with OK and write the configuration back to the LANCOM router.