3) Go to the menu Wireless LAN → General → Physical WLAN settings.
Image Added 4) Make sure, that the WLAN interface is enabled and set the WLAN operation mode to Station (Client mode).
Image Added 5) Change to the tab Client mode and make sure, that the parameter Keep client connection alive is active and Scan bands is set to All.
Image Added 6) Go to the menu Logical WLAN settings and select the WLAN interface used in step 2 (in this example WLAN-1).
Image Added 7) Make sure, that the WLAN network is enabled and enter the WiFi name you want to establish a connection with as Network name (SSID).
Image Added 8) Go to the tab Encryption and change the following parameters:
- Key 1/passphrase: Enter the WPA key of the WiFi network you want to connect to.
- WPA version: Select the used encryption mode of the WiFi network you want to connect to (in this example WPA2).
Image Added
9) Set up a Plain Ethernet connection via the setup wizard Set up Internet access and enter an unused DSL port.