Description: This document describes a way to integrate a LANCOM R&S® Unified Firewall into an existing network that uses a LANCOM router as the gateway.
Requirements:Scenario illustrations: Current situation:- This document assumes a simple network scenario where a LANCOM router operates as a central gateway for the internal network services (e.g. DHCP) and also provides Internet access.
- The Internet connection is implemented using the xDSL modem integrated in the LANCOM router or via the WAN interface (for devices without a modem).
- The local network (IP address range 192.168.1.0/24) is connected via the Ethernet interface ETH-1 to a LANCOM switch, which the local network components (PC, notebook, server, etc.) are connected to.
- The other Ethernet interfaces of the LANCOM router (e.g. ETH-2 to ETH-4) are also set up for the local network (default setting).
- This network scenario is to be extended with an additional component, a LANCOM R&S® Unified Firewall, and the least possible configuration effort is to be used.
![](http://support.lancom-systems.com/knowledge/download/attachments/36450940/0.B12.jpg?version=1&modificationDate=1572010382254&api=v2)
Target situation: This way of integrating the Unified Firewall is also referred to as a Layer-3 loop. - The firewall is connected to two Ethernet ports on the LANCOM router (in this case ETH-2 and ETH-4) and via an additional “transfer” network, which has to be configured on the LANCOM router.
- We will use the default networks, which are configured on the Unified Firewall with its factory default settings:
- eth1: 192.168.1.0/24
- eth0: 192.168.0.0/24
Since the existing local network provided by the LANCOM router already has the IP address range 192.168.1.0/24, connecting the firewall port ETH-1 to the LANCOM Ethernet port ETH-2 means that the Unified Firewall is available to the local network under the address https://192.168.1.254:3438.
Procedure: 1) Connect the Unified Firewall to the LANCOM router: 1.1) Connect the LANCOM router and the Unified Firewall using Ethernet cables as shown in the illustration under “Target situation”: - LANCOM port ETH-2 <-> Unified Firewall port eth1
- LANCOM port ETH-4 <-> Unified Firewall port eth0
1.2) Power up the Unified Firewall and wait a moment. 1.3) Check that you can reach the Unified Firewall on the local network at the IP address 192.168.1.254 (e.g. per ping). 1.4) Open the configuration interface of the Unified Firewall in a browser with the URL https://192.168.1.254:3438. 1.5) Carry out the basic configuration of the Unified Firewall. The procedure is described in Chapter 2, “Getting Started” of the Unified Firewalls User Manual.
2) First configuration steps on the LANCOM router: 2.1) In LANconfig, open the configuration dialog for the LANCOM router and switch to the menu item IPv4 → General → IP networks. 2.2) Open the configuration of the existing network INTRANET by clicking Edit. 2.3) Change the interface tag from 0 to 1. 2.4) Add a new IP network and configure the following parameters: - Enter a descriptive name.
- Set the IP address and netmask to 192.168.0.1 and 255.255.255.0, respectively.
- This is the IP address of the LANCOM router in the transfer network, which is connected to the port eth0 on the Unified Firewall.
- Set the logical interface assignment to LAN-2.
- Set the Interface tag to the value 2.
2.5) Click OK to accept the values and then navigate to the menu Interfaces → LAN → Ethernet ports → ETH 4.Since the LANCOM Ethernet port ETH-4 is connected to the Unified Firewall port eth0, which supports the local network 192.168.0.0/24, the LANCOM Ethernet port ETH-4 must also support the same IP network.
You achieve this by setting the interface used for the logical network to LAN-2. 2.6) The configuration of the LAN interfaces in the LANCOM router should then appear as follows. 2.7) Write the configuration back to the LANCOM router.
3) Configuration steps on the Unified Firewall: 3.1) Basic network configuration: 3.1.1) Log in to the configuration interface of the Unified Firewall with administrator rights. 3.1.2) Navigate to the menu Network -> Network connections and edit the default network for the Ethernet interface eth0. - Enter a descriptive name for this network. From the perspective of the Unified Firewall, this network is on the WAN side, so we’ve given it the name WAN_LANCOM.
- Set the Default Gateway to the IP address of the LANCOM router in this network. In this example it is 192.168.0.1/24 (see step 2.4).
- Save the changes.
3.1.3) Edit the default network for the Ethernet interface eth1. - Enter a descriptive name for this network. From the perspective of the Unified Firewall, this network is on the LAN side, so we’ve given it the name LAN_LANCOM.
- Save the changes.
3.1.4) Because the other two default networks (eth2 & eth3) are not required, you can delete these from the configuration.
3.2) Configuring the packet filter in the Unified Firewall: 3.2.1) Setting up the packet filter configures the basic functionality of the Unified Firewall. The first thing to do is to create an Internet object using the desktop objects toolbar: - Give the new Internet object a descriptive name.
- To set the connection, use the “+” symbol in the blue circle and select the WAN_LANCOM connection created in step 3.1.2.
- You then create the Internet object.
3.2.2) In the next step, add a network to the configuration by means of the desktop objects toolbar. - Give the new network object a descriptive name.
- Since the LAN represents the local network 192.168.1.0/24 from the perspective of the firewall, you must select the Ethernet interface eth1 and enter the IP address range in the field Network IP.
- You then create the network object.
3.2.3) On the desktop of the firewall configuration, click on the LAN network object and select the Link icon. 3.2.4) Use the mouse to click on the Internet object you created (a blue dashed line is drawn between the two objects). 3.2.5) In the Connection dialog, you can add one of the services from the selection list on the right-hand side by clicking on the “+” character in front of the service. If you wish to add complete groups of services, click on the “+” character in front of the respective service group (e.g. “Internet”). In this configuration example, the Unified Firewall should allow the outgoing communication of the protocols ICMP, SSH, HTTP and HTTPS to the Internet. 3.2.6) When you are ready, you create the new connection rule. 3.2.7) To put the configuration into effect, go to the menu bar and click the button Activate. Although the Internet connection of the Unified Firewall is now set up, the status of the connection “WAN_LANCOM” in the menu Network -> Connections -> Network Connections will still be displayed with the status RED. Running a traceroute to the IP address 8.8.8.8 (tracert 8.8.8.8) from a network PC shows that the data does not flow through the Unified Firewall; instead, the LANCOM router is forwarding the connection directly to the Internet. We will change this with the configuration steps that follow in step 4.
4) Final configuration steps on the LANCOM router: With these final configuration steps, the Unified Firewall is integrated into the network so that all Internet traffic flows through the firewall and is regulated by it. 4.1) In LANconfig, open the configuration dialog for the LANCOM router and switch to the menu item IP router → Routing → IPv4 routing table. 4.2) Open the configuration of the existing default route by clicking Edit. 4.3) Change the routing tag from 0 to 2. 4.4) Add a new routing tag and configure the following parameters: - Assign the IP address 255.255.255.255 and the netmask 0.0.0.0.
- Set the Interface tag to the value 1.
- Enable the route.
- In the Router field you now enter the IP address of the Unified Firewall where it can be reached from the local network 192.168.1.0/24. In this example it is the address 192.168.1.254 (see steps 1.3 and 1.4).
- Switch the IP masquerading for this route off.
4.5) The configuration of the two default routes should then look like this. 4.6) Write the configuration back to the LANCOM router. All Internet traffic now passes through the Unified Firewall. You can test this from the command-line interface on a network PC, for example, by executing a trace route to the public IP address 8.8.8.8 (tracert 8.8.8.8). In the configuration of the Unified Firewall, the network connection WAN_LANCOM will now be displayed as active (green).
|