Available Knowledge Base articles on the LANCOM operating system LCOS LX

Description:

This document contains a list of all articles on the LCOS LX operating system available in the Knowledge Base.

• Seite:
  Troubleshooting guide: Access points with LCOS LX in a WLC cluster cannot establish a connection to the Slave
• Seite:
  Recommended channel selection in the 6-GHz band for access points with LCOS LX
• Seite:
  Troubleshooting guide: A device attempting to authenticate in the Wi-Fi is rejected or the device loses the Wi-Fi connection (LCOS LX)
• Seite:
  Configuring an LACP trunk between a LANCOM GS-3xxx series switch and an LCOS LX access point
• Seite:
  LANCOM LX-6500(E): Improvements to PoE power management as of LCOS LX 6.14 in IEEE 802.3at operation
• Seite:
  Configuring an LACP trunk between a LANCOM GS-23xx series switch and an LCOS LX access point
• Seite:
  Configuring an LACP trunk between a LANCOM XS or GS-45xx series switch and an LCOS LX access point
• Seite:
  Configuring the antenna mask for LCOS LX access points with external antennas (as of LCOS LX 6.14)
• Seite:
  Breaking-out Wi-Fi data traffic from access points with LCOS LX to a central router via L2TPv3 tunnel
• Seite:
  Regularly restart an LCOS LX access point by configuring a cron job on the LCOS router or LCOS access point
• Seite:
  Comparison of the features of LCOS 10.72 and LCOS LX 6.12
• Seite:
  Saving higher log levels and traces to the internal syslog of an access point with LCOS LX
• Seite:
  Setting up LEPS-U with dynamic VLAN on an access point with LCOS LX
• Seite:
  Connecting an ePaper access point with LCOS LX to the ePaper server
• Seite:
  LCOS LX: Recommendations for access points operating a P2P link in a WLAN controller scenario
• Seite:
  The operating principle and use of the LANCOM Layer-2 Management protocol (LL2M) under LCOS LX
• Seite:
  Client Management for access points with LCOS LX
• Seite:
  Configuring a point-to-point (P2P) WLAN link with LCOS LX access points
• Seite:
  Troubleshooting guide: Firmware update of a LANCOM device via the LANCOM Management Cloud fails
• Seite:
  Overview of the current LANCOM operating systems
• Seite:
  LEPS-MAC: Setting up LEPS (LANCOM Enhanced Passphrase Security) in LANCOM access points (LCOS LX)
• Seite:
  Updating the firmware of LCOS LX access points via Windows command line using SCP
• Seite:
  Specific issues when using RADIUS authentication with dynamic VLAN assignment on LCOS LX access points (802.1X)
• Seite:
  RADIUS authentication of an LCOS LX-based access point via a GS-3xxx-series switch at a LANCOM router operating as a RADIUS server (802.1X)
• Seite:
  RADIUS authentication of an access point via a switch at a router operating as a RADIUS server in LANCOM infrastructure (802.1X)
• Seite:
  Creating a Wireshark trace on an LCOS LX Access Point
• Seite:
  Available Knowledge Base articles on the LANCOM operating system LCOS LX
• Seite:
  Creating a configuration backup of an LCOS LX access point
• Seite:
  Procedure for gathering debug information after a sudden restart of an access point with the operating system LCOS LX (as of LCOS LX 5.30)
• Seite:
  Configuring a cloud-managed hotspot in the LANCOM Management Cloud (all components LMC-managed)
• Seite:
  Documentation on the LANCOM operating system LCOS LX
• Seite:
  RADIUS authentication of an LCOS LX-based access point via a GS-23xx-series switch at a LANCOM router operating as a RADIUS server (802.1X)
• Seite:
  Firmware update on an access point with LCOS LX operating system
• Seite:
  LCOS LX: Changing the mode in 2.4 GHz or 5 GHz
• Seite:
  LED blinking characteristics of LANCOM routers and access points
• Seite:
  LCOS LX version 5.32: Which functions are included in the WLAN controller support?
• Seite:
  LCOS LX 5.20: Important details regarding new features
• Seite:
  Configuration of the LANCOM LX-640x cannot be opened with LANconfig 10.32 or LANconfig 10.40 RC2
• Seite:
  LANCOM LW-500: Using SNMPv3 after updating from LCOS LX 4.00 to LCOS LX 5.10
• Seite:
  Menu reference documents of LCOS and LCOS LX Versions
• Seite:
  Troubleshooting guide: With LCOS LX devices, a configuration change cannot be carried out with LANconfig
• Seite:
  WLAN client with Intel® "802.11ac" WLAN module cannot connect to a LANCOM LX-640x & LANCOM LW-600 with an 802.11ax SSID
• Seite:
  LANCOM access point with LCOS LX: Configuring a Public Spot scenario that uses VLAN
• Seite:
  Configuring static IPv4 parameters in LCOS LX-Access Points